Camaro Z28 V8-305 5.0L VIN F FI (1991)
Control Arm Bushing: Service and Repair
Fig. 5 Control Arm Bushing Removal
Fig. 6 Control Arm Bushing Installation
1.
Raise and support vehicle and remove control arm as outlined previously.
2.
Press bushings out of control arm using suitable tools as shown in Fig. 5.
3.
Reverse procedure to install, ensuring bushing is properly seated in control arm, Fig. 6. If replacement bushing fits loosely in control arm, or if
mounting areas are damaged or deformed, control arm must be replaced.
