chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Keyless Entry Transmitter > < Remove or Disconnect
Page 1
background image

Keyless Entry Receiver: Service and Repair
Install or Connect

Remote Control Door Lock Receiver (Buick Wagon)

1. Tape (11) to bottom of receiver (4).

^

Strongly recommend using new tape to ensure adhesion over life of receiver. Do not use substitution.

2. Electrical connectors.
3. Align hole in tab on receiver (4) with gage hole in inner wheelhouse.
4. Press receiver firmly against inner wheelhouse.
5. Left quarter inner rear trim finish panel.

Keyless Entry Transmitter > < Remove or Disconnect