Caprice Wagon RWD V6-262 4.3L (1992)
7.
Install original stabilizer shaft with NEW attachment hardware as illustrated in Figure 1.
8.
Remove rear axle support.
9.
Lower vehicle.
10.
Install Campaign Identification Label.
Campaign Identification Label/Claim Information
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. When using the new campaign identification label, be sure to install the clear protective covering. Additional
"Campaign Identification Labels" can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday through Friday 8:00 a.m. to 4:30
p.m. EST). Ask for Item Number S-1015 when ordering.
Apply "Campaign Identification Label" only on a clean, dry surface.
Submit a Product Campaign Claim with the information indicated:
Refer to the General Motors Claims Processing Manual for details on Product Campaign Claim Submission.
