chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Roof Rack Frame: > < Luggage Rack Slat Screws - Rust Formation
Page 1
background image

Roof Rack Frame: Customer Interest
Roof Rack - Wind Noise/Buffeting

Number: 91-206-10

Section: 10

Date: February 1991

Corporate Bulletin No.: 131004

Subject:

WIND BUFFETING AT ROOF RACK

Model and Year:

1991 CAPRICE WAGON

THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 91-154-10, DATED JANUARY 1991. THE
INFORMATION HAS BEEN COMPLETELY REVISED.  ALL COPIES OF 91-154-10 SHOULD BE DISCARDED.

Condition:

Wind noise/buffeting from roof area of vehicle.

Cause:

Roof rack cross rails

Correction:

Replace BOTH front and rear cross rails with new parts as outlined in the Service Manual.

IMPORTANT:

The rail assemblies MUST be replaced as a set due to the slight change in shape. Using an old rail with a new rail will not correct the
wind noise condition and may result in unacceptable appearance.

Part numbers are as follows:

Front:

10079694

Rear:

10079695

Parts are currently available from GMSPO.

IMPORTANT:Incorrect positioning of the new rails still has the potential to cause a buffeting noise. The correct position for the rails is either

completely together, or at least 200 mm (8 inches) apart.

Use published times.

All Technical Service Bulletins for Roof Rack Frame: > < Luggage Rack Slat Screws - Rust Formation