Caprice Wagon RWD V8-305 5.0L (1991)
Seat Bottom Frame: All Technical Service Bulletins
Seat Cushion (Front) - Sags At Rear of Seat Cushion
Number:
91-482-10
Section:
10
Date:
FEB. 1992
Corporate Bulletin No.: 131078
ASE No.: B1
Subject:
FRONT SEAT CUSHION SAGS AT REAR OF SEAT CUSHION
Model and Year:
1991 CAPRICE
Condition:
Rear of front seat cushion sags below frame.
Cause:
Insufficient support springs.
Correction:
Install repair kit # 16730854 as follows:
Parts are expected to be available on March 9, 1992. In case of limited inventory, parts will be placed on 400 Control to waive VIP surcharges. Only
verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation
at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.
1.
With aid of a helper, remove front seat assembly from vehicle and place on a clean work surface bottom side up.
2.
Loosen trim from bottom of seat frame as required to expose rear of cushion and frame.
3.
Position seat cushion to design location as required.
