Caprice Wagon RWD V8-305 5.0L (1991)
Repair weatherstrips and flanges by (See Figure 2).
1.
Removing the windshield pillar and center pillar garnish moldings.
2.
Partially remove the weatherstrip from the upper flange areas by grasping with hand and pulling. The portion of the weatherstrip on the rocker
flange may be left in place.
3.
If gaps at the flange joints exist (Indicated on Figure 2), apply sealer to fill the gaps at the joints.
4.
Apply a continuous bead of sealer to the upper length of the weatherstrip cavity, from the front corner of the rocker area to the rear corner of the
rocker area (See Figure 2, Section A-A).
5.
Reinstall weatherstrip to the flange.
6.
Reinstall the windshield and center pillar garnish moldings.
Labor Operations:
