chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/C - Inadequate Heat/Air Flow Distribution|Page 5419 > < Defroster - Inadequate Performance
Page 1
background image

Air Duct: All Technical Service Bulletins
A/C - Inadequate Heat/Air Flow Distribution

Number:

91-324-1A

Section:

1A

Date:

MAY 1991

Corp. Bulletin No.: 131205

Subject:

INADEQUATE HEAT/AIR FLOW DISTRIBUTION TO DRIVER'S SIDE FLOOR

Model and Year:

1991 CAPRICE

FIGURE 1

Condition:

Some 1991 B-Car vehicles may experience inadequate driver's side heat.

Cause:

Inadequate heat and air flow distribution to the drivers side from the heater floor outlet.

Correction:

Install revised heater floor outlet.

Procedure, Parts and Information:

Install a revised heater floor outlet, P/N 10100996. The revised outlet may be identified from the old outlet by the addition of a rectangular opening and
the removal of an extension tab on the left hand side of the outlet, as shown in Figure 1.

Parts are currently available from GMSPO.

Vehicles prior to the following breakpoints are affected.

Willow Run

Arlington

MW 229589

MR 122077

Labor Operation Number:

D1517

A/C - Inadequate Heat/Air Flow Distribution|Page 5419 > < Defroster - Inadequate Performance