Caprice Wagon RWD V8-305 5.0L (1991)
Figure 2
8.
Place the inflator module on a work bench or other surface away from all loose or flammable objects and with its soft vinyl trim cover facing up,
away from the surface. Refer to Figure 2.
9.
Clear a space on the ground approximately six feet in diameter where the inflator module is to be deployed. A paved outdoor location where there
is no activity is preferred. If an outdoor location is not available, a space on the shop floor where there is no activity and sufficient ventilation is
recommended. Make certain that no loose or flammable objects are within the deployment area.
Figure 3
10.
Place the inflator module with its soft vinyl trim cover facing up on the ground in the space just cleared. Refer to Figure 3.
