Cavalier L4-144 2.4L DOHC VIN T SFI (1997)
Alignment: Service and Repair
Front Wheel Alignment
Measuring Front Alignment Angles
Important:
^
Install alignment equipment following equipment manufacturer's instructions.
^
Jounce front and rear bumpers three times to normalize suspension prior to measuring angles.
^
Measure alignment angles and record the readings. If adjustments are necessary, make them in the following order:
1. Camber.
2. Toe.
Front Caster Adjustment
Caster is not adjustable. If the caster angle is not within specifications, inspect for suspension support misalignment or front suspension damage. Replace
parts as necessary. Refer to "Body And Frame" to determine proper underbody alignment.
Front Camber Adjustment
Important: When camber adjustment is necessary, Refer to "Front Suspension" for instructions on modifying the front strut.
GENERAL PROCEDURE
^
Loosen both strut to knuckle nuts just enough to allow movement.
^
Adjust the camber to specification by moving top of wheel in or out. Refer to "Specifications."
^
Tighten the strut-to-knuckle nuts to 180 Nm (133 ft. lbs.).
Front Toe Adjustment
