Cavalier L4-2.2L VIN 4 (1998)
Radiator Hose: Service and Repair
Radiator Hose Replacement (Outlet)
REMOVAL PROCEDURE
NOTICE: When adding coolant, use DEX-COOL (R) coolant. If silicated coolant is added to the system, premature engine, heater core or radiator
corrosion may result. In addition, the engine coolant will require change sooner-at 50,000 km (30,000 mi) or 24 months.
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Drain the coolant to a level below the hose that is being removed. Recover the coolant. Refer to Draining and Filling Cooling System.
3. Remove the radiator inlet hose (3) and the clamps (2) from the radiator and the coolant outlet (1).
4. Disconnect the radiator outlet hose (1) and the clamps (2) from the following places:
^
The radiator
^
The radiator outlet pipe (3)
^
The radiator surge tank
5. Remove the radiator outlet hose.
INSTALLATION PROCEDURE
NOTICE: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting
which could cause the fitting to crack or break.