Cavalier L4-2.2L VIN 4 (1998)
Tighten the screws to 4 Nm (35 lb in).
12.
Install the upper steering column cover.
13.
Install the lower steering column cover and attaching screws.
Tighten
Tighten the screws to 4 Nm (35 lb in).
14.
If equipped, install a new tilt lever.
15.
Connect the two yellow SIR connectors at the base of the steering column.
16.
Install the CPA in each connector and clip the connector(s) to the I/P brace.
17.
If equipped, position the left side insulator panel to the bottom of the I/P and install the attaching screws.
Tighten
Tighten the screws to 2 Nm (18 lb in).
18.
Install the AIR BAG fuse and install the fuse panel cover.
19.
Turn the ignition switch to the ON position and verify that the AIR BAG indicator light flashes seven times and goes out.