Cavalier L4-2.2L VIN 4 (1998)
6. Remove the SDM mounting fasteners (2).
7. Remove the SDM (1) from the floor pan (3).
IMPORTANT: If the SDM mounting holes or fasteners are damaged to the extent that the module can no longer be properly mounted use the following
repair. Torque the replacement fastener with a hand tool in order to prevent stripping the replacement fastener.
1. Remove the stripped fastener and discard it.
2. Drill and tap the weld nut for use with a 7.00 x 1.0 mm bolt.
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
3. Install the SDM with new fastener GM P/N 25601790.
4. Tighten
Tighten fastener to 14 N.m (124 lb. in).