Cavalier L4-2.2L VIN 4 (1998)
Door Window Assembly Sash
REMOVE OR DISCONNECT
1. Door window assembly to the down position to align with access holes.
2. Door trim panel.
3. Enough door water deflector to access door window assembly nuts.
4. Door window assembly nuts.
5. Bolts and rear door energy absorber.
6. Lift rear of door window assembly, then front of door window assembly.
7. Door window assembly from outside of door.
8. Door window assembly sash rivet.
9. Door window assembly sash.
INSTALL OR CONNECT
1. Door window assembly sash.
2. Door window assembly sash rivet.
3. Door window assembly from outside of door.
4. Door window assembly by inserting front of door window assembly, then rear of door window assembly.
5. Door window assembly nuts.
TIGHTEN
^
Nut to 10 Nm (89 lb. in.).
6. Rear door energy absorber and bolts.
7. Door water deflector.
8. Door trim panel.
With Power Regulator
WINDOW REGULATOR REPLACEMENT
REMOVAL PROCEDURE
