Cavalier L4-2.2L VIN F (2004)
The accumulator mounting bracket bolt may contact the right strut tower sheet metal. Add another washer under the head of the accumulator mounting
bracket bolt. This will provide extra clearance between the tip of the bolt and the strut tower. Refer to the arrow in the illustration above for the location
of the ground out.
Correction 3
The accumulator may contact the bottom of the PCM (Powertrain Control Module). Loosen the accumulator mounting bracket bolt and push the
accumulator down and then retighten the mounting bracket bolt. This will increase the clearance between the PCM bracket and the accumulator. Refer to
the arrow in the illustration above for the location of the ground out.
Warranty Information
