Cavalier L4-2.2L VIN F (2004)
9. Pull downward on the back of the I/P compartment to remove the OnStar(R) module (2) from the bracket (3).
10. Remove the module (2) through the opening for the passenger inflator module.
INSTALLATION PROCEDURE
1. Install the OnStar(R) module (2) thorough the opening for the passenger inflator module.
2. Pull downward on the back of the I/P compartment to install the module to the bracket (3).
3. Slide the unit upward in the mounting bracket.
4. Connect the electrical connectors (3) to the module (1).
5. Connect the coaxial cable connectors (4) to the module (1).