chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Locations|Page 411
Page 1
background image

Sunroof / Moonroof Module: Service and Repair

SUNROOF CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

1. Close the sunroof.
2. Remove the headliner.
3. Remove the tie wraps securing the power sunroof control module wire harness to the drive and return tubes.
4. Release the retainers for the power sunroof control module by sliding the control module (2) towards the middle of the vehicle.
5. Disconnect the wire harness electrical connectors from the power sunroof control module (2).

INSTALLATION PROCEDURE

1. Connect the wire harness connectors to the power sunroof control module (2).
2. Engage the power sunroof control module retainers by sliding the control module (2) towards the left side of the vehicle.
3. Install the tie wraps to secure the power sunroof control module wire harness to the drive and return tubes.
4. Install the headliner.

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Locations|Page 411