Cavalier L4-2.2L VIN F (2004)
Lock Cylinder Switch: Description and Operation
IGNITION LOCK CYLINDER CASE, INCLUDING THE PASSLOCK(TM) SENSOR
The ignition lock cylinder fits inside the ignition lock cylinder case and operates the ignition switch when turned by a key with the proper mechanical
cut. When the ignition key is used to turn the ignition lock cylinder to crank, start, a magnet on the lock cylinder passes close to the Passlock(TM) Sensor
within the ignition lock cylinder case. The magnet activates the Security Hall Effect Sensor in the Passlock(TM) Sensor which completes a circuit from
the security sensor signal circuit through a resistor to the security sensor low reference circuit. The resistance value will vary from vehicle to vehicle.
If a magnet from outside of the ignition lock cylinder case is used to attempt to steal the vehicle, the Tamper Hall Effect Sensor will be activated. This
completes a circuit from the security sensor signal circuit through a tamper resistor to the security sensor low reference circuit bypassing the security
resistor. If the ignition switch is forced to rotate without the correct key, or if the ignition lock cylinder is removed by force, the Passlock(TM) Sensor
will be damaged and will not operate.
