chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 4728 > < Disabling and Enabling|Page 4726
Page 5
background image

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the LH IP outer trim cover. 
5. Remove the AIR BAG Fuse from the LH IP wiring harness junction block.

IMPORTANT:  With the AIR BAG Fuse removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates. This is a
normal operation and does not indicate an SIR system malfunction.

6. Remove the Connector Position Assurance (CPA) from the inflatable restraint steering wheel module coil connector, located under the instrument

panel, left of the steering column.

Driver Shorting Bar

Disabling and Enabling|Page 4728 > < Disabling and Enabling|Page 4726