Cavalier L4-2.2L VIN F (2004)
4. Install the upper shaft assembly.
5. After the race and upper shaft assembly (1) is firmly attached to the centering sphere, rotate the shaft 90 degrees downward in order to lock the
centering sphere in place.
6. Remove the centering sphere installer and the race and upper shaft assembly from the vise.
7. Disassemble J 41688 by separating the base. After the tool is disassembled, remove the race and upper shaft from J 41688.
8. Lubricate the centering sphere with GM P/N 12345718 (Canadian P/N 10953516).
9. Using the alignment marks from the disassemble procedure, tilt the upper and lower shafts 90 degrees to each other and engage.
