chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Trunk / Liftgate Latch Release Cable > < Trap Resistant Trunk Kit - Function/Installation|Page 9986
Page 1
background image

Trunk / Liftgate Latch: All Technical Service Bulletins
Rear Lid Latch - Revised Procedure for Replacement

File In Section: 10 - Body

Bulletin No.: 83-15-15

Date: August, 1998

SERVICE MANUAL UPDATE

Subject:
Section 10-8 - Revised Remove and Install Procedure for Rear Compartment Lid Latch Assembly to Add Spacer

Models:
1995-98 Chevrolet Cavalier (Convertible Only)
1995-98 Pontiac Sunfire (Convertible Only)

This bulletin is being issued to revise the remove and install procedure for rear compartment lid latch assembly (to add spacer for convertible only) in
Section 10-8 of the Service Manual.

Rear compartment Lid Latch Assembly Remove or Disconnect

1.

Rear compartment lid latch cable assembly.

2.

Unclip cable door at top of rear compartment lock release box.

3.

Rear compartment lid remote release cable from lock release box.

4.

Rear compartment lid latch assembly bolts.

5.

Rear compartment lid latch assembly.

6.

Rear compartment lid latch assembly spacer (convertible only).

Install or Connect

1.

Rear compartment lid latch assembly spacer (convertible only).

2.

Rear compartment lid latch assembly.

3.

Rear compartment lid latch assembly bolts.

4.

Rear compartment lid remote release cable to lock release box.

5.

Clip cable door at top of rear compartment lock release box.

6.

Rear compartment lid latch cable assembly.

Trunk / Liftgate Latch Release Cable > < Trap Resistant Trunk Kit - Function/Installation|Page 9986