Cavalier/Z24 L4-138 2.3L DOHC VIN D MFI (1995)
1. Balance shaft assembly to block. Use Loctite(R) 242 on the housing assembly to block bolts (122 - 126), refer to Figure 3.
Use the following procedure if the balance shaft housing was disassembled:
a. Loose assemble the housing assembly to the block. Tighten Housing to Block fasteners to 5 Nm (44 lb.in.).
b. Use the tightening sequence in Figure 1 to tighten housing fasteners and housing assembly to block bolts.