Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
1.
Inspect the first and second rivet at both sides of the vehicle; rivet length of more than 3.18 mm (0.125 in.) from vehicle body will require
grinding. The first rivet at each side may be covered with a sealing patch that will need to be removed. Refer to Figures 12 - 13.
2.
Grind the rivets until they are within the limit. Be careful not to grind too much of the rivet.
3.
Clean the area around the rivets which were ground down with a clean cloth dampened with isopropyl (rubbing alcohol).
4.
Install loop fastener vertically over all the rivets.
e.
If condition is due to missing or damaged balance link covers:
1.
Open the convertible top to the 1/2 open position.
