Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
^
Nuts to 8.5 Nm (76 inch lbs.).
Gear Position
3. With the ABS hydraulic modulator upside down, and the gears facing you, rotate each ABS brake modulator gear counterclockwise until
movement stops. This procedure will position the pistons on the ABS brake modulator very close to the top of the modulator bore. This will
simplify the brake bleeding procedure.
ABS Brake Modulator/Master Cylinder Assembly Components
4. Position the motor pack onto brake modulator, aligning the three motor pack gears with the modulator gears.
