Cavalier/Z24 L4-144 2.4L DOHC VIN T SFI (1996)
Camshaft Position Sensor: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the CMP sensor harness connector at the sensor.
2. Remove the CMP sensor bolt (2).
3. Remove the CMP sensor (1) from the camshaft housing (3).
INSTALLATION PROCEDURE
Important: Inspect sensor O-ring for wear, cracks or leakage. Replace if necessary. Lubricate new O-ring with engine oil before installing.
1. CMP sensor (1) into camshaft housing (3).
2. CMP sensor bolt (2),
Tighten
Sensor bolt to 10 N.m (88 lb. in.).
3. Sensor harness connector.
