chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Belt: > < Seat Shoulder Belt (Front) - Plastic Cover Comes Loose|Page 9131
Page 1
background image

Seat Belt: Customer Interest
Seat Belt Webbing - Twists

File In Section: 10 - Body 

Bulletin No.: 53-16-12B

Date: March, 1996

Subject:
Twist in the Seat Belt Webbing Between the Pillar Guide Loop and the Retractor 
(Untwist/Fold Webbing to Pass Through the Guide Loop)

Models: 
1995-96 Chevrolet Cavalier Sedan
1995-96 Pontiac Sunfire Sedan

This bulletin is being to remove the "N" car. Please discard Corporate Bulletin Number 53-16-12A (Section 10 - Body).  

Condition

Some owners may comment on a twist in the front seat belt webbing between the pillar guide loop and the retractor.

Correction

DO NOT remove the guide loop cover, center pillar upper trim panel, or retractor to correct the twist in the seat belt webbing.

Instead, untwist the seat belt and fold the webbing to allow the twist to pass through the seat belt guide loop.

The seat belt webbing should be flat without any twists.

Warranty information

For vehicles repaired under warranty, use: 

Labor Operation

Labor Time

C9050/51

Use published labor operation time.

All Technical Service Bulletins for Seat Belt: > < Seat Shoulder Belt (Front) - Plastic Cover Comes Loose|Page 9131