Cavalier/Z24 V6-191 3.1L VIN T MFI (1994)
9.
Tighten engine mount bracket to body bolts.
10.
Tighten engine mount to engine mount bracket nuts.
11.
Center the snubber block on the transaxle mount (transaxle in "neutral"), then tighten the two nuts holding the snubber block to mount.
Parts are expected to be available on May 2, 1994.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation:
J1510
Labor Time:
0.8 hr
Add:
0.2 hr (For inspection)
Add:
0.2 hr (To loosen/tighten transaxle mounts)