chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Water Pump|Specifications|Page 1820
Page 1
background image

Catalytic Converter: Customer Interest
Catalytic Converter - Booming Noise at 1,500 RPM

Number:

84-125

Section:

6F (VIII)

Date:

May, 1984

Subject:

1500 RPM BOOM

Model and Year: 1982-84 CELEBRITY AND CITATION

VEHICLES EQUIPPED WITH LR8 ENGINE (INCLUDING 1984 CELEBRITY WAGONS)
TO:

ALL CHEVROLET DEALERS

CONDITION

Some 1982-84 Celebrity and Citation vehicles equipped with the LR8 engine may exhibit a loud booming noise at 1500 rpm.

CAUSE

This condition may be caused by the catalytic converter hanger being preloaded.

CORRECTION

To correct this condition, the following procedures should be followed.

1.

Remove the load from the catalytic converter exhaust hanger.

a.

Loosen the converter and manifold flange joint bolts.

b.

Break the converter joint loose.

c.

Retighten the bolts to 20-40 N.m (15-30 ft. lbs.) while holding the converter up against the heat shield.

d.

Make sure the distance between the upper and lower converter hanger rivets is less than 62 mm.

Cradle Dampener Assembly

2.

Install a newly released additional cradle dampener assembly (see illustration)..

P/N

Description

22527158

Dampener Assembly

10021800

Bolt

Do not remove the existing dampener.

All Technical Service Bulletins: > < Water Pump|Specifications|Page 1820