chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Valve Body: > < A/T - THM 125C Torque Converter Clutch Shudder|Page 3964
Page 1
background image

Valve Body: Customer Interest
A/T - Oil Exhausting From Vent

Number:

83-T-13

Section:

VII

Date:

Dec., 1982

Subject:

OIL EXHAUSTING FROM VENT - THM 125C
TO:

ALL CHEVROLET DEALERS

Some 1982 and 1983 THM 125C transmissions may experience a condition where oil exhausts from the transmission vent. This condition is
a result of the bolts that attach the auxiliary valve body cover to the auxiliary control valve assembly, bottoming out in the bolt hole threads
in the auxiliary control valve assembly. The bolts will obtain the original bolt torque, but will not clamp the cover tight to the auxiliary
control valve assembly, leaving a gap. Oil will then leak, and exhaust out the transmission vent.

When servicing any THM 125C transmission for this condition, refer to the following service procedure.

SERVICE PROCEDURE

1.

Remove the valve body cover and gasket (or RTV sealant).

2.

Replace the four auxiliary valve body cover attaching bolts with four shorter M6x1.0x20 mm bolts (P/N 8643250) that are also used
in attaching the servo cover to the case. Torque the bolts to 11 N-m (8 ft.lbs.)

3.

Install the valve body cover and gasket (or RTV sealant).

All Technical Service Bulletins for Valve Body: > < A/T - THM 125C Torque Converter Clutch Shudder|Page 3964