chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Constant Velocity Joint Boot: > < Inner Constant Velocity Joint & Seal|Page 4090
Page 1
background image

Constant Velocity Joint Boot: Customer Interest
FWD Drive Axle - Boot Protectors

Number:

84-28

Section:

4D (III)

Date:

Nov., 1983

Subject:

DRIVE AXLE BOOT PROTECTORS FOR FRONT WHEEL VEHICLES

Model and Year:

1980-84 CITATIONS, 1982-84 CAVALIERS AND CELEBRITYS

Drive Axle Boot Protectors

TO:

ALL CHEVROLET DEALERS

To prevent accidental damage to the drive axle boots when doing service work on a vehicle in the area of the drive axle, it is recommended that
Protectors J-28712 be installed on the boots (refer to illustration). It is also important that these boot protectors be used when drive axle assembly is
removed from a vehicle (transmission removal, etc.).
Beside protecting the boot, the protectors aid in preventing over-extension when removing a drive axle. If a drive axle joint is over-extended, internal
parts may fall out and there is a potential for dirt entering joint which will result in failure of the axle.

Always remember to remove the protectors after the service work is completed.

All Technical Service Bulletins for Constant Velocity Joint Boot: > < Inner Constant Velocity Joint & Seal|Page 4090