chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2377 > < Diagram Information and Instructions|Page 2374
Page 1
background image

Radiator Cooling Fan Motor: Initial Inspection and Diagnostic Overview

System Check

1.

With engine cold and idling, move A/C selector, if equipped, to NORM. Coolant fan should run.

2.

With engine coolant below operating temperature, move A/C selector to OFF. Coolant fan should turn off.

3.

With engine warm, run engine at fast idle for several minutes. Coolant fan should turn on before coolant temperature indicator comes on or coolant
temperature gauge needle reaches H.

Troubleshooting Hints

1.

On 1989 models, Check C/H fuse.

2.

On 1990 models, Check FAN/ELECT fuse.

3.

On 1991 models, Check FAN/ALT fuse.

4.

On all models, replace coolant fan relay if coolant fan runs with ignition switch off.

Initial Inspection and Diagnostic Overview|Page 2377 > < Diagram Information and Instructions|Page 2374