Celebrity V6-173 2.8L VIN X 2-bbl (1985)
SHOULDER WEAR
CUPPING
SERVICE PROCEDURE
1.
Tire wear should be inspected:
A.
If only slight cupping is noticed, and the cross grooves in the tire's outside shoulder are still visible (see Figure 1), the tires should be rotated.
The modified "X" pattern should be used (See Figure 2). This method will best equalize wear after a few thousand miles.
B.
If the cupping or wear is severe, and/or the cross grooves in the outside shoulder are not visible, tire replacement may be necessary. Tire
replacement, if required, will be made with the same brand and type tire as original equipment. These tires will be furnished on a "direct
billed" basis to the dealer. Replacement tires must be obtained direct from the tire company by calling one of the following toll-free numbers:
Firestone
- (216) 379-7096 (collect)
General
- 1-800-TIRE-FIX
Goodyear
- 1-800-TIRE-TEC
