Removing Drum Brake Wheel Cylinder - Celebrity V6-191 31L (1990)
Wheel Cylinder: Service and Repair
Overhaul
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
Wheel Cylinder
Wheel Cylinder Components
1. Remove boots (22), pistons (23) and seals (24), spring assembly (25) and bleeder valve (20).
2. Clean all parts with brake fluid.
3. Inspect cylinder bore and pistons for scoring, nicks, corrosion and wear. Use crocus cloth to polish out light corrosion.
^
Replace wheel cylinder assembly if bore will not clean up with crocus cloth.
ASSEMBLY
NOTE: Ensure hands are clean before proceeding with assembly.
1. Clean all parts in clean denatured alcohol.
2. Dry parts with unlubricated compressed air.
