Celebrity V6-191 3.1L (1990)
the following parts were modified:
-
4th clutch plates assembly (fiber) are thinner by 0.51 mm (0.020"). The fiber material is the same thickness; only the steel part of the plate was
made thinner. The two-plate assembly has four white stripes, while the single plate fiber plate has four green stripes.
-
4th clutch reaction plates are made thinner by 0.1 mm (0.004") for the two-plate assembly.
-
4th clutch apply plate does not have the step used on the single apply plate, but it does have a slight machined-in taper.
DATE OF PRODUCTION CHANGE:
Starting SOP 1990, all transaxle models covered by this bulletin were built with the twoplate 4th clutch assembly.
