chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Transmission Cooler, A/T > < 3T40 (125C) Automatic Transaxle|Page 3960
Page 3
background image

into the coupling before shaft installation, the two mating shafts may disengage.

9. Pinch bolt at intermediate steering shaft.

10. Left inner fender splash shield.
11. Left lower ball joint.
12. Left drive axle.
13. Four bolts at hub and bearing assembly.
14. Left front brake caliper and bracket.
15. Left front tire and wheel assembly.
16. Lower vehicle.
17. Two bolts at top of transaxle mount bracket.

TIGHTEN

^

Bolts to 82 Nm (61 lb. ft.).

18. Two crossover pipe-to-left manifold bolts.
19. Tighten crossover-to-right manifold clamp.
20. Torque struts at engine mounts.
21. Remove J 28467-A and J 36462.
22. Negative battery cable.
23. Air cleaner assembly.

ADJUST

^

Fluid level.

INSPECT

^

For proper completion of repairs.

^

For proper fluid level.

^

For fluid leaks.

Transmission Cooler, A/T > < 3T40 (125C) Automatic Transaxle|Page 3960