Chevette L4-98 1.6L (1982)
FIGURE 2 - Coach Joint and Windshield Reveal Moulding
2.
Seal off the coach joint and lower windshield by placing a piece of tape over the coach joint and windshield reveal moulding on the affected side
(see Figure 2).
FIGURE 3 - Gap Between Fender and Hood
3.
Use an unrestricted water flow directed into the gap between the fender and the hood. This will duplicate driving in a heavy rain (see Figure 3).
If no water enters the vehicle, the inner fender to cowl seam and the windshield pillar to cowl joint flange are OK, proceed to Step 5.
