Chevette L4-98 1.6L (1982)
FIGURE 10 - Inner Fender to Cowl Seam
REPAIR PROCEDURE (see Table 1 for materials list)
A.
Inner Fender to Cowl Seam
-
Seal the inner fender to cowl seam (Figure 10) with
a brushable seam sealer or an aerosol rubberized undercoating.
-
Seal seam as far up on cowl as possible.
NOTICE:
When using a brushable sealer, it may be necessary to use a brush with an extended handle in order to reach hidden areas.
FIGURE 4 - Die Relief Hole
-
Fill in the die relief hole with a thumb grade sealer
(see Figure 4) .
-
Re-water test.
-
Continue diagnosis at Step 5 above.