Chevette L4-98 1.6L (1982)
Front end water leaks may be caused by various items. Figure 1 illustrates the locations of the following areas:
1.
Sealer skip at the inner fender to cowl seam.
2.
Poor sealer adhesion at the windshield pillar to cowl joint flange.
3.
Cracked sealer at the coach joint.
4.
A bridge in the MIG weld at the windshield opening lower corner.
5.
Sealer skip under the windshield reveal moldings.
FIGURE 1 - Probable Waterleak Locations
DIAGNOSIS
More than one (1) leak may be present on a vehicle in any or all of the areas detailed in Figure 1. In order to ensure that a satisfactory repair is performed
the first time, the following procedure is recommended:
1.
Loosen the sill plate, remove the kickpad and fold back the carpet on the affected side of the vehicle. Inspect for signs of leaking.
