Citation II L4-151 2.5L VIN R TBI (1984)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber Replace
1.
Open deck lid and remove trim cover, then remove shock absorber upper attaching nut.
2.
Raise rear of vehicle and support rear axle using a suitable jack.
3.
Disconnect shock absorber at lower attachment and remove shock absorber from vehicle.
4.
Reverse procedure to install. Torque shock absorber lower attaching nut to 43 ft. lbs. Torque shock absorber upper attaching nut to 13 ft. lbs.
