chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Parking Lock Cable: > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise
Page 1
background image

Parking Lock Cable: Customer Interest
Ignition Switch - Unworkable ACCESSORY Position

84-234
3B (IX)
Jan., 1985
Subject:

IGNITION SWITCH AND/OR SHIFT LEVER UNWORKABLE ON AUTOMATIC TRANSMISSIONS WITH CONSOLE

Model and Year:

1984 CELEBRITY, CAMARO, CAVALIER, AND CITATION

TO:

ALL CHEVROLET DEALERS

CONDITION

The ignition switch may become unworkable in the accessory position, and/or the shift lever will not move when excessive shift handle button loads are
applied.

CAUSE

The ignition switch becomes unworkable when excessive shift handle button loads are applied while the ignition switch is in the accessory position, and
the park lock cable slider is forced past the ignition switch inhibitor pin.

CORRECTION

Replace ignition switch assembly and park lock cable assembly using the following part numbers.

NOTICE:

The ignition switches can be identified by a beige colored park lock inhibitor body attached to the ignition switch assembly.

Ignition Switch With Beige Colored Park Lock Inhibitor

Body

Park Lock Cables

Automatic Trans- 
mission Without

Citation &

Tilt Wheel

7843497

Celebrity

Code TR

10037700

Automatic Transmission With Tilt
Wheel

7843451

Camaro

Code TS

10037701

Cavalier

Code TP

10037702

All Technical Service Bulletins for Parking Lock Cable: > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise