Citation II L4-151 2.5L VIN R TBI (1984)
Turbine Shaft: Technical Service Bulletins
A/T - Updated Seal Ring Installation Tool Required
85-128
7C
SEPT., 1985
Subject:
CHEVROLET SHOP MANUAL UPDATE - ADDITION
OF SEAL RING INSTALLATION TOOL
Model and Year:
THM 125C ALL
TO:
ALL CHEVROLET DEALERS
ILLUSTRATION
Use the following information to update the THM 125C automatic transaxle section of the Chevrolet Shop Manual.
Shown below, the green colored turbine shaft seal rings (105) require the use of installation tool No. J-29569-1 and sizing tool No. J-29569-2. The
yellow colored turbine shaft seal ring requires the use of installation tool No. J-29829-1 and sizing tool No. J-29829-2.
Use figure below to update figure 79 on page 125C-48 in the 1986 THM 125C automatic transaxle section of the applicable Chevrolet Shop manual.