chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

FWD Drive Axle - Boot Protectors|Page 3424 > < FWD Drive Axle - Boot Protectors
Page 1
background image

Constant Velocity Joint Boot: All Technical Service Bulletins
FWD Drive Axle - Boot Protectors

Number:

84-28

Section:

4D (III)

Date:

Nov., 1983

Subject:

DRIVE AXLE BOOT PROTECTORS FOR FRONT WHEEL VEHICLES

Model and Year:

1980-84 CITATIONS, 1982-84 CAVALIERS AND CELEBRITYS

Drive Axle Boot Protectors

TO:

ALL CHEVROLET DEALERS

To prevent accidental damage to the drive axle boots when doing service work on a vehicle in the area of the drive axle, it is recommended that
Protectors J-28712 be installed on the boots (refer to illustration). It is also important that these boot protectors be used when drive axle assembly is
removed from a vehicle (transmission removal, etc.).
Beside protecting the boot, the protectors aid in preventing over-extension when removing a drive axle. If a drive axle joint is over-extended, internal
parts may fall out and there is a potential for dirt entering joint which will result in failure of the axle.

Always remember to remove the protectors after the service work is completed.

FWD Drive Axle - Boot Protectors|Page 3424 > < FWD Drive Axle - Boot Protectors