Cobalt L4-2.0L SC VIN P (2005)
15.
Repeat this procedure on the opposite side front door as required.
Rear Door Bolt Replacement Procedure
1.
Open the front door in order to remove the rear door hinge bolts..
2.
Working one bolt at a time, replace any hinge to body bolts identified through the inspection procedure as requiring replacement.
Tighten
^
Malibu -- Tighten the rear door hinge fasteners to 26 Nm (19 lb ft).
^
Cobalt/Pursuit -- Tighten the rear door hinge fasteners to 35 Nm (26 lb ft)
3.
Paint installed bolts with touch-up paint to match the body color.
4.
Repeat this procedure on the opposite side rear door as required.
Parts Information
Warranty Information
