chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 15244 > < SIR Disabling and Enabling Zones|Page 15242

Cobalt L4-2.0L SC VIN P (2005)

Page 17
background image

23. Disconnect the roof rail module-left connector from the vehicle harness connector.

ENABLING PROCEDURE

1. Remove the key from the ignition switch.

2. Connect the roof rail module-left connector to the vehicle harness connector.
3. Install the CPA to the roof rail module-left connector.
4. Install the garnish molding to the left upper lock pillar.

5. Connect the seat belt pretensioner-LF connector.
6. Install the CPA to the seat belt pretensioner-LF connector.
7. Install the left/driver lower center pillar trim.

SIR Disabling and Enabling Zones|Page 15244 > < SIR Disabling and Enabling Zones|Page 15242