chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Head Impact Non-Compliance|Page 15307 > < Recall - Head Impact Non-Compliance
Page 2
background image

^

If the vehicle is equipped with side impact air bags, do not perform the service procedure in this bulletin. No further action is required. Submit a
claim for Vehicle is Equipped with Side Impact Air Bags, labor operation V 1593 for 0.2.

Interim Production Repair

Current Production and Service Repair

^

If the vehicle does not have side impact air bags, refer to the service procedure in this bulletin. Perform Steps 1-4 on the driver's side of the vehicle
only. After performing Steps 1-4, the headliner will drop about 203 mm (8 in), which will provide adequate room to determine if the energy
absorbing (EA) piece has been installed.

-

If either the interim production or current production/service repair have been performed, reinstall the headliner. A-pillar trim panel, and
sunshade. Submit a claim for Inspect Vehicle to Determine if Energy Absorbing Device is Installed, labor operation V 1594 for 0.4.

-

If the production repair has not been performed, complete the service procedure in this bulletin. Install the energy absorbing (EA) plastic piece
into the headliner at both the driver and passenger side A-pillar locations. Submit a claim for Install Energy Absorbing Device, labor operation V
1556 for 0.7.

Courtesy Transportation

The General Motors Courtesy Transportation Program is intended to minimize
customer inconvenience when a vehicle requires a repair that is covered by
the New Vehicle Limited Warranty. The availability of courtesy
transportation to customers whose vehicles are within the warranty
coverage period and involved in a product recall is very important in
maintaining customer satisfaction. Dealers are to ensure that these
customers understand that shuttle service or some other form of courtesy

Recall - Head Impact Non-Compliance|Page 15307 > < Recall - Head Impact Non-Compliance