Cobalt L4-2.0L SC VIN P (2005)
3.
Disengage the clip holding the latch release handle to the rear compartment shelf.
4.
Remove the rosebud fastener which retains the latch cable to the rear compartment shelf.
5.
Remove the grommet from the sheet metal.
6.
Pull the latch assembly into the passenger compartment.
7.
Remove the latch assembly from the vehicle.
Installation Procedure
1.
Install the latch assembly.
2.
Feed the cable and the release handle through the sheet metal to the rear compartment.
Note:
Refer to Fastener Notice in Cautions and Notices.