Cobalt L4-2.0L SC VIN P (2005)
1. Install the thermostat and retaining sleeve with the dimple placed into the housing slot.
2. Important: Lubricate the O-ring with soapy water or coolant before installing the O-ring in the water pump.
Install the feed pipe that connects the thermostat housing to the water pump.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolt that secures the water pump feed pipe.
^
Tighten the bolt to 10 Nm (18 inch lbs.).
4. Fill the cooling system.
