Cobalt L4-2.0L SC VIN P (2005)
Oil Pan: Service and Repair
Oil Pan Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Drain the engine oil.
3. Remove the engine drive belt.
4. Remove the intercooler pump bracket bolts from the oil pan.
5. Remove the lower AC compressor bolt from the oil pan.
6. Remove the oil pan bolts.
7. Remove the oil pan.
Installation Procedure
1. Make sure that the oil pan and mounting surface on the lower crankcase are free of all oil and debris.
2. Apply a 2 mm bead of RTV, Saturn P/N 21019581, around the perimeter of the oil pan and the oil suction port opening. Do not over apply the
RTV. More than a 2 mm bead is not required.
