Cobalt L4-2.0L SC VIN P (2005)
5. Remove the remaining engine front cover bolts.
6. Remove the engine front cover.
7. If the engine front cover gasket is damaged, remove the front engine mount.
Installation Procedure
1. If removed, install a new engine front cover gasket.
2. Install the front engine mount.
3. Install the engine front cover.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine front cover bolts.
^
Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).
5. Install the water pump bolt.
