Cobalt L4-2.0L SC VIN P (2005)
Heat Shield: Service and Repair
Fuel Tank Heat Shield Replacement
Fuel Tank Heat Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Release the exhaust extension pipe insulators (1, 2) from the underbody hangers.
3. Release the muffler insulator (3) from the underbody hanger and slowly lower the exhaust to rest on the rear axle beam.
4. Support the LH side of the fuel tank, just clear of the fuel tank heat shield.
5. Remove the LH fuel tank strap bolts and the strap.
6. Using a flat-bladed screwdriver, release the heat shield push-rivet style retainers (1).
