chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - 4T45E Hard to Shift Into Gear|Page 11943 > < Ignition - Key Stuck in Ignition Lock Cylinder|Page 11938
Page 1
background image

Shifter A/T: All Technical Service Bulletins
A/T - 4T45E Hard to Shift Into Gear

Bulletin No.: 05-07-30-015

Date: June 02, 2005

TECHNICAL

Subject:
Hard To Shift Or Select Vehicle Gear, Shifter Sticks/Binds/Jams (Replace Shifter Control Handle)

Models:
2005-2006 Chevrolet Cobalt
2005-2006 Pontiac Pursuit (Canada)

with 4T45E Automatic Transaxle (MN5)

Condition

Some customers may comment that the button on the shifter handle is stuck and will not move.

Correction

Verify that the shifter button is inoperative by evaluating if the park pawl pin on the shifter assembly moves when activating the button. If the
parking pawl does not move when the button is activated, the shifter handle will have to be replaced. If the park pawl pin does move, refer to
normal diagnostics in SI.

1.

Set the parking brake.

2.

Shift the vehicle into NEUTRAL.

3.

Turn and slide down the shift control sleeve (3).

4.

Loosen the shift control handle screw (2) with an allen wrench.

5.

Remove the shift control handle (1).

A/T - 4T45E Hard to Shift Into Gear|Page 11943 > < Ignition - Key Stuck in Ignition Lock Cylinder|Page 11938